The Dual Wiegand Interface is a module which allows door expansion using Wiegand readers and dedicated inputs and outputs on the ChallengerPlus and Network Access Controller panels.
- Compatible with ChallengerPlus and Network Access Controller
- 2 Wiegand reader ports
- 4 inputs and 2 relay outputs on board
- RS-485 bus for communication back to ChallengerPlus or Network Access Controller
- Upgrade via remote flash firmware
How to upgrade your firmware
Firmware is available via CTPlus (installer software). You will need to download CTPlus from the Interlogix website before you can proceed with installation and setup.