In the V10-06-8305 firmware build there have been some major improvements in the background code of the Challenger 10 communications paths including several new default paths and a few new comms path menu items.
It has been noted that some customers have had dallier connection issues after the upgrade, specifically after a full download from Titan 3.3
The problem seen upon dial attempts is the panels phone line is picked up and then hangs up straight away.
The reason has been found to be specific to Titan 3.3.
New fields made active upon upgrade of Challenger in Titan from [Challenger 10 Pre 10- 06] to [Challenger 10] are remaining blank rather than populating with the required default information.
These paths are: Connect timeout & Connect Retries
It has been found that after setting a valid Connect timeout (60-90 seconds) dallier functionality will return.
It is also noted to leave the Connect retries at 0 as this is an IP Receiver related setting.