Polling the Readers
On the Four Door Controller, readers are polled as RASs in the DGP programming, under Poll Arming Stations:
Tick the appropriate RAS number based on the following numbering:
In In Out Out
First door 1 5 9 13
Second door 2 6 10 14
Third door 3 7 11 15
Fourth door 4 8 12 16
Example: Door 19's IN RAS number would be 3 and the OUT reader would be 11, as Door 19 is the third door on the DGP, RAS 3 is the first IN reader for the third door, and RAS 11 is the first OUT reader for the third door.
RAS LCD Fitted is only used when the RAS being polled has an LCD (i.e: Keypad)
- TS0870 Readers need to be configured with a Configuration Card and assigned a RAS Address using that config card. Consult the TS0870P Smart Card Programmer manual for more information.
- RASs 5 to 8 and RASs 13 to 16 (i.e: the second IN readers) are used where card plus PIN are used on the same door. For example, Door 1 may require the user to badge at RAS 1 and enter a PIN at RAS 5, where both RAS 1 and RAS 5 are on the same side of the door.