THIS ISSUE IS RESOLVED WITH NEW FIRMWARE >CLICK HERE<
Challenger Input Expanders
There are two different models of the Input Expander, a Challenger Version 8 and a Challenger Version 10 board.
It is vital that you do not get these confused and you know exactly which model that you need.
The two models are shown below:
TS0021 (The Green Board) is the Version 8 Input expander, however these can come in a Blue board.
TS1021 (The Blue Board) these will only come in a Blue board. (Do not think that you have a Version 10 Input Expander without checking the part number!)
(As you can see on the V10 Blue board there is a white sticker with the part number on it, this sticker can either be on the front or the back of the board)
The reason that it is critical that you check the part numbers is that if you have a Version 8 DGP then you can use the V8 Input expanders HOWEVER if you have a Version 10 DGP then you MUST use the TS1021 Version 10 Input Expanders as the V8 Expander will not function correctly.
NOTE: If you download the latest V10 DGP Firmware then you can use either V8 TS0021 or V10 TS1021 Input Expanders.
To get this latest firmware please contact Technical Support on 1300 780 904
NOTE: If you have a Version 8 DGP TS0020 then you MUST use Version 8 Input Expanders TS0021